UNDERGROUND DISTRIBUTION CABLE (URD,UD) CONCENTRIC NEUTRAL
15kV COPPER (UL) - 90°
C Rating
CONDUCTOR
- Solid or Class "B" Strand
CONDUCTOR SHIELD
- Unique Permashield® System
INSULATION - Exclusive Corona-Immune Insulation 
INSULATION SHIELD
- Free Stripping Semiconducting Layer 
CONCENTRICS - Neutrals as Specified Below
JACKET
- 50 mil Over Concentric Wires, Insulating LLDPE W/3 Red Stripes, Semiconducting Available

FULL NEUTRAL

  CATALOG NUMBER SUFFIX CATALOG NUMBER SUFFIX Single Phase
Single Conductor
11200 31200  
175 Mil Insulation (100%)* 220 Mil Insulation (133%)* Ampacity**
  Copper O.D. O.D.   O.D. O.D.    
CATALOG Size No. Neutral Over Over Cable Over Over Cable
NO. (AWG/ of Wires Insul. Jacket Weight Insul. Jacket Weight Direct Nonmetallic
PREFIX kcmil) Str. (No. - AWG) (Inches) (Inches) (lbs./kft) (Inches) (Inches) (lbs./kft) Burial Conduit
 
102C15- 2 7 16-#14 0.71 1.01 749 0.80 1.11 829 215 160
101C15- 1 19 20-#14 0.74 1.05 869 0.84 1.15 953 245 180
111C15- 1/0 19 25-#14 0.78 1.09 1017 0.88 1.19 1104 275 205
121C15- 2/0 19 20-#14 0.83 1.17 1234 0.92 1.26 1326 310 235
131C15- 3/0 19 25-#14 0.88 1.22 1464 0.97 1.31 1561 345 270
141C15- 4/0 19 20-#14 0.93 1.32 1793 1.03 1.41 1897 390 310
125C15- 250 37 25-#14 0.99 1.37 2096 1.09 1.49 2225 430 345

UNDERGROUND DISTRIBUTION CABLE (URD,UD) CONCENTRIC NEUTRAL
15kV COPPER (UL) - 90°
C Rating
CONDUCTOR
- Solid or Class "B" Strand
CONDUCTOR SHIELD
- Unique Permashield® System
INSULATION - Exclusive Corona-Immune Insulation 
INSULATION SHIELD
- Free Stripping Semiconducting Layer 
CONCENTRICS - Neutrals as Specified Below
JACKET
- 50 mil Over Concentric Wires, Insulating LLDPE W/3 Red Stripes, Semiconducting Available

ONE-THIRD NEUTRAL
  CATALOG NUMBER SUFFIX CATALOG NUMBER SUFFIX Three Phase
3 - 1/C Cables
Paralleled or
Triplexed
13200 33200
175 Mil Insulation (100%)* 220 Mil Insulation (133%)*  Ampacity**
  Copper O.D. O.D.   O.D. O.D.    
CATALOG Size No. Neutral Over Over Cable Over Over Cable
NO. (AWG/ of Wires Insul. Jacket Weight Insul. Jacket Weight Direct Nonmetallic
PREFIX kcmil) Str. (No. - AWG) (Inches) (Inches) (lbs./kft) (Inches) (Inches) (lbs./kft) Burial Conduit
 
102C15- 2 7 6-#14 0.71 1.01 632 0.80 1.11 713 175 160
101C15- 1 19 7-#14 0.74 1.05 717 0.84 1.15 801 200 185
111C15- 1/0 19 9-#14 0.78 1.09 830 0.88 1.19 917 225 210
121C15- 2/0 19 11-#14 0.83 1.14 965 0.92 1.23 1055 250 235
131C15- 3/0 19 14-#14 0.88 1.19 1136 0.97 1.28 1230 285 270
141C15- 4/0 19 18-#14 0.93 1.24 1350 1.03 1.34 1449 320 310
125C15- 250 37 21-#14 0.99 1.30 1537 1.09 1.41 1661 350 340
135C15- 350 37 29-#14 1.09 1.42 2019 1.19 1.52 2133 410 405
150C15- 500 37 26-#12 1.22 1.58 2745 1.32 1.68 2871 480 475
175C15- 750 61 25-#10 1.41 1.82 3944 1.51 1.91 4088 560 570

Note:
The diameters and weights shown are approximate and subject to normal manufacturing tolerances.
* Approved for use on 15kV REA system. 
** Ampacity assumes:
1) Earth RHO 90°C - cm/Watt 4) 75% load factor
2) Earth ambient temperature 20°C 5) Average 36 inch burial depth
3) Average earth interface temperature limited to 45°C 6) Sheath losses included

Home | Index | Terms | www.kerite.com
Copyright © 2000 Kerite. All rights reserved

The Kerite Company
Phone: 203.888.2591 / 800.777.7483
Fax: 203.888.1987

Design by Innovative Systems

Home Index Terms and conditions www.kerite.com